不同初始饱和度红砂岩冻融后物理力学性质研究          下载免费PDF全文

沈世伟  吴飞  甘霖  姜满 《探矿工程》2021,48(1):120-128

对不同初始饱和度红砂岩冻融循环前后进行物理及力学试验研究,探讨初始饱和度对红砂岩冻融损伤的影响。本文设定红砂岩试样初始饱和度为20%、40%、60%、80%、100%,冻融次数设定为20次,对冻融前后试样分别测定质量、纵波波速以及进行单轴压缩试验。试验结果表明：1）冻融后不同初始饱和度红砂岩的物理性质发生变化,纵波波速降低、质量减小,但变化程度不同;2）随饱和度的增大,试样经冻融后峰值强度和弹性模量均呈降低趋势,但只有饱和度大于60%时,降低趋势较明显。本文研究为寒区隧道及地下工程建设以及岩土地质灾害监测与治理提供理论依据和试验基础。  相似文献   

Quantitative characterization of different coal rank reservoirs permeability based on NMR and X-CT technology     

GUO Guangshang  XING Liren  LI Hao 《中国地质调查》2021,7(6):103-108

With the increasing development of coalbed methane (CBM) field, the quantitative characterization and evaluation of coal reservoir physical properties is becoming more and more important to CBM scale development. In order to solve the limitations of conventional methods for testing coal reservoir physical properties, the authors used the high-tech technologies such as nuclear magnetic resonance technology and CT scanning technology to effectively solve the problems of in-situ and integrity of rock samples and acquire the porosity and permeability. Nuclear magnetic resonance and CT scanning experiments of coal samples were carried out to rapidly obtain the pore type, pore size distribution and connectivity, effective porosity, spatial distribution of pore fissures and other refined coal reservoir physical parameters, based on the samples of middle and low rank coal in Shenfu block and high rank coal in Shizhuangnan block. So a set of quantitative characterization analysis technology that can be applied to coal reservoirs with different coal rank was formed.  相似文献   

Geology and mineralization of the Sanshandao supergiant gold deposit (1200 t) in the Jiaodong Peninsula,China: A review     

《China Geology》2021,4(4):686-719

The Jiaodong Peninsula in Shandong Province, China is the world’s third-largest gold metallogenic area, with cumulative proven gold resources exceeding 5000 t. Over the past few years, breakthroughs have been made in deep prospecting at a depth of 500–2000 m, particularly in the Sanshandao area where a huge deep gold orebody was identified. Based on previous studies and the latest prospecting progress achieved by the project team of this study, the following results are summarized. (1) 3D geological modeling results based on deep drilling core data reveal that the Sanshandao gold orefield, which was previously considered to consist of several independent deposits, is a supergiant deposit with gold resources of more than 1200 t (including 470 t under the sea area). The length of the major orebody is nearly 8 km, with a greatest depth of 2312 m below sea level and a maximum length of more than 3 km along their dip direction. (2) Thick gold orebodies in the Sanshandao gold deposit mainly occur in the specific sections of the ore-controlling fault where the fault plane changes from steeply to gently inclined, forming a stepped metallogenic model from shallow to deep level. The reason for this strong structural control on mineralization forms is that when ore-forming fluids migrated along faults, the pressure of fluids greatly fluctuated in fault sections where the fault dip angle changed. Since the solubility of gold in the ore-forming fluid is sensitive to fluid pressure, these sections along the fault plane serve as the target areas for deep prospecting. (3) Thermal uplifting-extensional structures provide thermodynamic conditions, migration pathways, and deposition spaces for gold mineralization. Meanwhile, the changes in mantle properties induced the transformation of the geochemical properties of the lower crust and magmatic rocks. This further led to the reactivation of ore-forming elements, which provided rich materials for gold mineralization. (4) It can be concluded from previous research results that the gold mineralization in the Jiaodong gold deposits occurred at about 120 Ma, which was superimposed by nonferrous metals mineralization at 118–111 Ma. The fluids were dominated by primary mantle water or magmatic water. Metamorphic water occurred in the early stage of the gold mineralization, while the fluid composition was dominated by meteoric water in the late stage. The S, Pb, and Sr isotopic compositions of the ores are similar to those of ore-hosting rocks, indicating that the ore-forming materials mainly derive from crustal materials, with the minor addition of mantle-derived materials. The gold deposits in the Jiaodong Peninsula were formed in an extensional tectonic environment during the transformation of the physical and chemical properties of the lithospheric mantle, which is different from typical orogenic gold deposits. Thus, it is proposed that they are named “Jiaodong-type” gold deposits.©2021 China Geology Editorial Office.  相似文献   

2010—2016年江西省暖季短时强降水特征分析   总被引：2，自引：0，他引：2  

付超  谌芸  朱克云  单九生  曾智琳 《气象》2019,45(9):1238-1247

利用江西省2010—2016年5—9月1597个观测站逐小时降水资料对江西省短时强降水进行统计分析。采用REOF将降水场划分为5个区域：赣北南部（Ⅰ区）,抚州市及赣州中部（Ⅱ区）,赣北北部（Ⅲ区）,赣南南部、北部（Ⅳ区）以及赣中西部（Ⅴ区）。短时强降水高频区主要分布在山地及河谷附近,分别为湘赣交界罗霄山脉东侧、武夷山西侧、信江河谷、乐安河谷和昌江河谷。河谷附近短时强降水频次以昌江河谷最高（16.9次/a）,山地附近最高在罗霄山脉东侧（12.6次/a）,极端短时强降水分别位于上饶市东北部山区（3.7次/a）及九岭山南侧的锦江河谷（3.3次/a）。短时强降水主要发生在5月第3候,6、7月第3~4候以及8月第2~3候。Ⅳ、Ⅴ区具有单峰型的日变化特征;Ⅰ、Ⅱ、Ⅲ区具有双峰型的日变化特征。主峰基本集中在下午17时;次峰在上午08—10时。短时强降水对暴雨贡献率基本在40%以上,Ⅰ、Ⅱ区的暴雨天气过程将近一半是由短时强降水贡献的。信江河谷是暴雨雨量中心,但并不是短时强降水雨量中心;昌江河谷与武夷山西麓既是暴雨中心也是短时强降水中心。  相似文献   

Macroscopic criteria for Green type porous materials with spheroidal voids: application to double porous materials          下载免费PDF全文

W. Q. Shen  J.‐F. Shao  D. Kondo 《国际地质力学数值与分析法杂志》2017,41(13):1453-1473

Combined effects of matrix plastic compressibility and void shape are investigated for ductile porous materials. To this end, a spheroidal volume containing a confocal spheroidal (prolate or oblate) void subjected to uniform strain rate boundary conditions has been first studied. A Green type matrix is chosen as a prototype for investigating effects of plastic compressibility. This is carried out by using a kinematics limit analysis theory from which a closed‐form expression of the macroscopic criterion is established for the considered class of materials. These results are then extended to ductile porous materials made up of a green matrix containing randomly oriented spheroidal voids. In the framework of a two‐step homogenization procedure, the obtained results are implemented to describe the macroscopic behavior of double porous materials involving spherical voids at the microscale and randomly oriented and distributed spheroidal voids at the mesoscale. For validation purpose, the new derived criteria are assessed and validated by comparing their predictions to available upper bounds and numerical data from literature. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

Structural, electronic and optical properties of orthorhombic distorted perovskite TbMnO₃     

蔡鲁刚  刘发民  钟文武 《海洋学报(英文版)》2010,29(9)

This paper calculates the structural parameters, electronic and optical properties of orthorhombic distorted perovskite-type TbMnO₃ by first principles using density functional theory within the generalised gradient approximation. The calculated equilibrium lattice constants are in a reasonable agreement with theoretical and experimental data. The energy band structure, density of states and partial density of states of elements are obtained. Band structures show that TbMnO₃ is an indirect band gap between the O 2p states and Mn 3d states, and the band gap is of 0.48 eV agreeing with experimental result. Furthermore, the optical properties, including the dielectric function, absorption coefficient, optical reflectivity, refractive index and energy loss spectrum are calculated and analysed, showing that the TbMnO₃ is a promising dielectric material.  相似文献   

Simulation and Validation of the Aerosol Optical Thicknessover China in 2006     

ZHANG Hu  ZHANG Min  CUI Zhenlei  WANG Yuesi  XIN Jinyuan 《Acta Meteorologica Sinica》2012,26(3):330-344

  相似文献   

Numerical analysis of the effect of natural microcracks on the supercritical CO2 fracturing crack network of shale rock based on bonded particle models          下载免费PDF全文

Peihuo Peng  Yang Ju  Yongliang Wang  Shaoqin Wang  Feng Gao 《国际地质力学数值与分析法杂志》2017,41(18):1992-2013

The problem of predicting the geometric structure of induced fractures is highly complex and significant in the fracturing stimulation of rock reservoirs. In the traditional continuous fracturing models, the mechanical properties of reservoir rock are input as macroscopic quantities. These models neglect the microcracks and discontinuous characteristics of rock, which are important factors influencing the geometric structure of the induced fractures. In this paper, we simulate supercritical CO₂ fracturing based on the bonded particle model to investigate the effect of original natural microcracks on the induced‐fracture network distribution. The microcracks are simulated explicitly as broken bonds that form and coalesce into macroscopic fractures in the supercritical CO₂ fracturing process. A calculation method for the distribution uniformity index (DUI) is proposed. The influence of the total number and DUI of initial microcracks on the mechanical properties of the rock sample is studied. The DUI of the induced fractures of supercritical CO₂ fracturing and hydraulic fracturing for different DUIs of initial microcracks are compared, holding other conditions constant. The sensitivity of the DUI of the induced fractures to that of initial natural microcracks under different horizontal stress ratios is also probed. The numerical results indicate that the distribution of induced fractures of supercritical CO₂ fracturing is more uniform than that of common hydraulic fracturing when the horizontal stress ratio is small.  相似文献   

Ecological classification of European transitional waters in the North-East Atlantic eco-region     

Cristina Galván  José Antonio Juanes  Araceli Puente 《Estuarine, Coastal and Shelf Science》2010

A new methodology to classify European North-East Atlantic transitional waters into ecological types has been developed based on the most important hydrological and morphological features that are likely to determine the ecology of aquatic systems in transitional waters. Hydrological indicators help identifying if a transitional water area is dominated by fresh or sea water and/or by intertidal or subtidal areas, while morphological indicators allow an estimation of the complexity of the transitional water and the diversity of the habitats involved. Twelve transitional waters of the southern Bay of Biscay were classified using this methodology and the five hydro-morphological types obtained were validated with benthic macro-invertebrate data. Transitional waters with a complex morphology showed the highest values of species diversity, while those with a smaller tidal influence showed lower species diversity. The ‘Scrobicularia’ and ‘Abra’ assemblages, previously identified in the study area, were found to be related to different types of transitional waters. The ‘Abra’ assemblage only appeared in estuaries with a complex morphology and dominated by tidal influences, while the ‘Scrobicularia’ assemblage was detected in all the transitional waters except for a single coastal lagoon. This classification of transitional waters may therefore be useful to establish the biological reference conditions needed for European Directives.  相似文献   

Late Quaternary fluvial aggradation and incision in the monsoon‐dominated Alaknanda valley,Central Himalaya,Uttrakhand, India     

Navin juyal  Yaspal Sundriyal  Naresh rana  Shipra chaudhary  Ashok k. Singhvi 《第四纪科学杂志》2010,25(8):1293-1304

The present study aims to explain the spatial and temporal variability in phases of aggradation/incision in response to changes in climate and seismicity during the late Quaternary in the Alaknanda River valley (a major tributary of the river Ganges or Ganga). Geomorphology, stratigraphy and optical dating of the fluvial sediment reveal that the oldest fluvial landforms preserved in the south of the Main Central Thrust are debris flow terraces developed during the early part of pluvial Marine Isotopic Stage 3. Following this, a period of accelerated incision/erosion owing to an increase in uplift rate and more intense rainfall occurred. In the Lesser Himalaya, three phases of valley fill aggradation around 26 ± 3 ka, 18 ± 2 ka and 15 ± 1 ka and 8 ± 1 ka occurred in response to changes in monsoon intensity and sediment flux. The last phase was regionally extensive and corresponds to a strengthening of the early Holocene Indian Summer Monsoon. A gradual decline in the monsoon strength after 8 ± 1 ka resulted in reduced fluvial discharge and lower sediment transport capacity of the Alaknanda River, leading to valley fill incision and the development of terraces. The study suggests that fluvial dynamics in the Alaknanda valley were modulated by monsoon variability and the role of tectonics was subordinate, limited to providing accommodation space and post‐deposition modification of the fluvial landforms. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献